|
The ABL-86T Angle and Bar Line is designed
to be fast, accurate, and simple to operate. It
features TWO 86 ton punch
units for simultaneous punching, and like the ABL-100, its high speed
servo motors, continuous probing and clamping, and sophisticated servo and valve
positioning software make it not only fast but more accurate than the
competition. As with all of our machinery, its PC based control system gives you
an economical and seamless interface with your office programming system.
SPECIFICATIONS
| Material Positioning Speed |
0 To 180 FPM |
| Accuracy |
+ or - 1/32" for lengths of
8' and under |
| Punch Capacity |
86 Tons |
| Maximum Hole Size |
1-1/4" in 5/8 Material |
| Maximum Slot |
13/16 x 1-1/2 |
| Hydraulic Power Unit |
Electric Motor |
30 HP 1750 RPM |
| Low Pressure Pump |
20 GPM 2000 PSI |
| High Pressure Pump |
10 GPM 4500 PSI |
| Shear |
Capacity |
250 Tons |
| Kerf |
0" |
| Maximum Bar Size |
5/8" x 6" |
| Maximum Angle Size |
6" x 6" x 5/8" |
| Material Capacity |
Maximum Length of Material |
40' (for standard Machine) |
| Maximum Bar size |
5/8" x 6" |
| Minimum Bar Size |
1/4" x 1-1/2" |
| Maximum Angle Size |
6" x 6" x 5/8" |
| Minimum Angle Size |
1-1/2" x 1/4" |
| Options |
Maximum material length up to 60' |
| Storage and loading table |
| Automated part marking unit |
Key Benefits
- Speed - 0 to
180 feet per
minute - The fastest of our angle lines! The high speed servo motor with a rack and pinion probe system allows this
machine to move the material at such high speeds without loss of accuracy.
- Accuracy - + or - 1/32 - Precision encoders mounted throughout the machine allows us to position
both length and gage within any shop's tolerance. Sophisticated servo and valve
positioning software provide accurate and smooth positioning. The use of continuous
probing and a length probe allow us to maintain this accuracy the entire length of the
material without slippage as with other systems that use wheel measuring and no gage
probes.
- Two 86 ton punch units - With simultaneous punching, you get not only great speed,
but also the ability to punch different hole sizes with a single pass.
- Graphical part programming - We were the first and best with graphical part programming. Keep an eye
out for our newest versions of part programming software!
Great Options
- Inline Marker System - Our Daisy Wheel type marking system can stamp any alpha-numeric string
onto the material as it is being processed. Just one less thing that will have to be done
by hand.
- CAD interface option - We can interface with many of today's most popular structural CAD
packages. We can also provide file formats to you or your CAD vendor so you can output
files straight from your system to ours. We can even convert some of your parts from your
old machinery software.
- Metric/Decimal inch part
programming - Have a metric job? Get your drawings in decimal inch? We can create our
parts in both metric and decimal inch format.
Controller Specifications
Windows XP operating system | 1.7 GHz Pentium
processor | Controlled Automations WinCAd
software | 40 GB hard drive
| Industrially enclosed touch screen display |
256 MB RAM | Positive pressure air-conditioned
enclosure | Color graphic programming
| Industrial keyboard and optical mouse
| Metric part capabilities
| CAD conversion option | 10/100 Ethernet
network card (wireless available)
* Controlled Automation reserves the right to update any
specifications at any time.
REQUEST MORE INFORMATION
|
