WHITNEY BEAMLINE CONVEYOR DRIVE MOTORS

TYPICAL CONVEYOR DRIVE MOTOR

1.) LIST THE NUMBER OF CONVEYOR DRIVE MOTORS/REDUCERS. IF THERE ARE MULTIPLE DRIVE MOTORS, SWITCHES CAN BE ADDED DURING RETROFIT TO CONTROL INFEED AND OUTFEED SEPARATELY

2.) LIST ALL NAMEPLATE DATA OF EACH. (MAKE SURE TO INCLUDE MANUFACTURER) WE NEED THIS INFORMATION TO ORDER REPLACEMENT PARTS.

TYPICAL MOTOR AND REDUCER NAMEPLATES

3.) WHAT ARE THE CONDITIONS OF EACH DRIVE MOTOR? (IF POSSIBLE CHECK BRUSHES FOR WEAR.)

INFEED CONVEYOR MOTOR

GOOD
 
FAIR
 
BAD

OUTFEED CONVEYOR MOTOR

(DISREGARD IF BEAMLINE HAS ONLY ONE CONVEYOR MOTOR)

GOOD
 
FAIR
 
BAD

LIST ANY OTHER DRIVE MOTOR OBSERVATIONS THAT MAY BE HELPFUL.

NOTE: IF CONVEYOR DRIVE MOTORS ARE HYDRAULIC, THEN DC OR SERVO DRIVE MOTORS AND REDUCERS MUST BE PURCHASED.

Whitney Beamline Inspection List